BMC's Jerry Brown Line One Technical Specifications Buyer's Guide Hollow Core Braided Spectra Line:
| 90 & 100
Non-Hollow Line One Braided Spectra Line (also known as "solid or solid core line"):
| Line Class
|| Breakage LBS
|| Diameter Inches
|| Diameter Millimeters
How To Spool Jerry Brown Line One Spectra On Your Fishing Reel
Unlike other fishing lines braided Spectra® line has a very long useful life, years, unless damaged. Whiles Spectra fibers are unable to cause reel corrosion, salt can. Contrary to popular belief, spools made of aluminum are not corrosion proof, aluminum can pit. When it comes to anodizing, the process often is more for looks than for longevity in regards to corrosion resistance. To protect your aluminum spools, it is a good idea that you wax and buff the empty spool with carnauba wax before putting the line on. Waxing the surface of the spool, and the spool body provides added protection. A quality wax will seal the porous surface of aluminum, providing protection against salt penetration, and the corrosion that will follow.
Commencing the spooling process:
Before starting, make sure that you have a freely rotating spool of line and that there are no under wraps. An under wrap can create a major problem, creating a pseudo drag that will create sufficient friction to break the line, as well as "digging" into the spool, eventually getting stuck, and resulting in line breakage. Once the process has commenced, if the above error is not corrected immediately, the result will be wasted line, and the process will have to be re-started. If you are 20 yards into the process, no biggie, but if you are into it for a couple of hundred yards, you have a totally different situation.
The best way to prevent the under wrap issue is to assure that an under wrap is not present. This is accomplished by removing a portion of the line from a spool, and then taping the end of the remaining line to the side of the spool so that an under-wrap is less likely the next time you take the line from that spool. If you have a free lining spool, then an under wrap is not an issue. Making sure before you start the process, is by far the most correct, safest, and most advisable method.
Contrary to popular belief, braided Spectra line will not slip. When the line is tied correctly to the spool, a braided Spectral line will grip the spool tightly. The use of a uni-knot, or San Diego knot, will assure a tight grip of the Spectra unto the reel. Always leave a long tag end when completing the knot. The tag end can then be laid across the arbor. Once the tag end is in the proper position, spool the first layer of spectra using a close side by side technique, using about 6 LBS of tension. This will wind the line tightly, and slippage will not occur. Once you do this, pull on the line, and you will see that the line will not slip.
Excessive crisscrossing must be avoided. Crisscrossing creates voids, which eventually causes the line to "dig in". Spectra line may be spooled when dry or wet, as it makes absolutely no difference in the tightness of the spooling, nor does doing it wet prevent any issues. A wet line makes it more difficult to apply the necessary tension needed to provide tight spooling. This obviously occurs due to slippage when the tension is applied. Should you wish to use the wet line process, use fresh water. The last thing you want is to have salt exposure from the bottom up.
Line winding machines:
The most important thing to remember when using a line spooler is speed. The use of high speeds will create more friction, friction generates heat. As we all know, heat and plastics are not the best of friends. When spooling Spectra, if you have a 2-speed reel, use the lower gear, it will be a slower spooling, however, it will generate less friction and less heat. When spooling Spectra braided lines, you can't be in a hurry. Cutting corners will surely result in disaster.
One issue that is important to prevent is the bunching of line on the sides of the spool. When spooling, make sure that the line is even from side to side. When the line bunches up on the sides of the spool, a total nightmare can result when a fish is hooked and line payout is quick. Such an event can cause the line to bind, increasing the drag, and eventually locking down the line breaking, or the rod and reel coming clear out of your hands.
Due to the different Spectra colors, when done using an electric line winding machine, one should clean and blow off the colored specks of dust that will be left over after a reel is spooled. Not doing so, may inadvertently add color to your line that it never had!
Line Measurement: Line Counters
The accuracy of line counters varies greatly. Depending on the mechanism, those that rely on a positive gear drive provide for good accuracy, while those that have a wheel that rides the spool that contains the line your purchased, DO NOT. Wheels slip, and during that slippage, yards come and go. While this is of concern to those who retail line, this is not a major concern to the end user. A full reel is after all, a full reel. Counters which use the wheel, tend to be less accurate when higher spooling speeds are used.
Once the process is complete, the line on your reel should feel "tight", hence a solid feel to it. If it feels soft, or "squishable" that is not good. A line that doesn't have the solid feel to it, will dig, and disaster will soon follow. To avoid this, one should apply the necessary tension during the spooling process.
One of the best techniques to apply tension to the spool is by using a knitted glove and using that to apply tension to the line, as it is going into the spool. The hand with the knitted glove is placed on the line that is being spooled onto the reel, not on the plastic spool that the line came in. Those using the 2 person method, may have the 2nd person that is holding the plastic spool apply pressure to the sides of the spool while holding the rod or axle that the plastic spooling is rotating on.
Spooling Spectra line onto the reel is the first and most important step in assuring the performance, reliability, and longevity of Spectra braided fishing line. Paying close attention to this important process will assure that your Jerry Brown Spectra Fishing Line will provide you with a long and trouble free life.
Splicing Monofilament Line onto Hollow Core Spectra:
Here is a basic ratio of hollow core Spectra line class to monofilament line class. This guide may be used to determine which size hollow core you need to splice the line class monofilament you wish to use for your wind on leader. Please note that monofilament line diameters vary from manufacturer to manufacturer, therefore the guide below is based on average monofilament diameters:
For 40 LB test Hollow Core you may use 10 LB test, but not more than 25 LB test mono
For 60 LB test Hollow Core you may use 20 LB test, but not more than 100 LB test mono
For 80 LB test Hollow Core you may use 40 LB test, but not more than 130 LB test mono
For 90 & 100 LB test Hollow Core you may use 40 LB test, but not more than 130 LB test mono
For 130 LB test Hollow Core you may use 60 LB test, but not more than 200 LB test mono
For 200 LB test Hollow Core you may use 80 LB test, but not more than 300 LB test mono
When splicing or making your own wind-on top shot leaders use of rigging needles makes the job easier. We have needles from Daho Products, hollow threading, reverse latch, and loop splicing needles. If you need assistance with needle selection or information on Daho Products needles, be sure to visit our Daho Needles Tech Tips , and for selecting needles sizes, our Daho Hollow Needle Size Guide .
If you have any questions or need assistance, please feel free to call or email me via our Contact Us page!