The Swifty Line Remover was developed to strip used fishing line from reels. It was designed to be compact and portable. All you will need to do is supply a power source (drill motor) and you can easily strip monofilament from 2lb. test to 100 lb. test. This is the capacity of a penn International 50SW. It will also strip all of the smaller reels down to micro spinning reels with 2 lb.test
How to use your Swifty Line Remover
Insert the spindle into the drill motor.
Attach both halves of the Swifty with the wing nut and washers. (only if disassembled).
Place the drill motor into a secure device.
Place fishing reel in free spool (conventional) or open bail (spinning reel).
Do not run line through rod guides.
Wrap line around the Swfty (do not tie).
Place drill motor in the "forward" rotation.
Firmly hold the fishing reel while depressing drill motor trigger.
Remove the used fishing line from the fishing reel.
Just before the fishing reel is empty, stop the drill motor.
Cut the remaining line off the fishing reel.
You can continue emptying additional reels until the Swifty is full. Once full, split the 2 halves by removing the wing nut.
Please recycle the used line by returning it to your local tackle store.
BlueMarlinChronicles.com
Divisions of BMC Tackle Inc.
311 SE 10th Street
Pompano Beach, Florida 33060
(954) 317-3532
(843) 580-9077 Contact Us Complete
BMC Tackle Guide